CREATIF Design Printed Layers

CREATIF Design Printed Layers

Postby admin » Tue Dec 29, 2015 4:53 pm

28.png


Once the user created his design, verified it for any errors against the rules database, passed the Auto Routing algorithm and fixed the conductive tracks, if needed, it is possible to view the printed layers of all the smart elements and tracks in the design. This process is implemented through the Functional Board -> Printed layers tab.
On the top of the Printed layers tab the user can select which parts of the design, other than printed layers, to see in this view – background image, smart elements and smart element’s tabs.
The printed layers view allows two separate presentations:
• Layers – view of printed layers as these will be sequentially printed on the fabric:
1. Interface Layer,
2. Bottom Conductor Layer,
3. Piezoelectric Layer,
4. Thermo Chromic Layer,
5. Dielectric Layer,
6. Phosphor Layer,
7. Bus Electrode Layer,
8. Transparent Conductor Layer,
9. Encapsulation Layer.
• Levels – view of printed levels as these will physically be situated on the fabric. There are between 3 and up to 7 levels to complete the functionality of any smart element:
1. Level 1 – Only Interface Layer can be printed on Level 1,
2. Level 2 – Only Bottom Conductor Layer can be printed on Level 2,
3. Level 3 – Four types of CREATIF ink layers can actually be printed on
Level 3 depending on the type of smart element that is being
printed – Piezoelectric, Thermo Chromic, Dielectric and
Encapsulation,
4. Level 4 - Three types of CREATIF ink layers can actually be printed on
Level 4 depending on the type of smart element that is being
printed – Phosphor, Bus electrode and Encapsulation,
5. Level 5 - Two types of CREATIF ink layers can actually be printed on
Level 5 depending on the type of smart element that is being
printed –Bus electrode and Encapsulation,
6. Level 6 – Only Transparent Conductor Layer can be printed on Level 6,
7. Level 7 – Only Encapsulation Layer can be printed on Level 7,
To run the Printed Layers engine user has to press the
29.png
button.
You do not have the required permissions to view the files attached to this post.
User avatar
admin
Site Admin
 
Posts: 80
Joined: Tue Feb 06, 2007 3:36 pm

Return to CREATIF Design Printed Layers

Who is online

Users browsing this forum: No registered users and 2 guests

cron